Reffix

CHAMALEONCode N036

Chamaleon 189 UHS Air-Dry Clear Coat Kit, 5 L

/ set · incl. VAT

Chamaleon 189 UHS Air-Dry Clear Coat Kit, 5 L
Manufacturer
CHAMALEON
Code
N036
Category
Varnishes
Country of origin
Germany
Availability: In stock
496.65 ₾

/ set · incl. VAT

Quantity

Tbilisi next day · free delivery over 100 ₾

What is in one set 2

  • 1xChamaleon 1L 2K UHS Air dry express clear coat 5LCode 00334
  • 1xChamaleon 2,5L UHS Hardener for 189 Clear CoatCode 00293

Specifications

General

Manufacturer
CHAMALEON
Code
N036
Category
Varnishes

Origin

Country of origin
Germany

Unit and packaging

Unit
set

Description

Chamaleon 189 Air Dry Express - a two-component UHS express clear coat, 5 l clear coat + 2.5 l UHS hardener 289. Outstanding curing speed without oven heating: at 20°C the car is ready for assembly in 40 minutes, saving time and energy and greatly increasing booth productivity. Optimised for both water- and solvent-based basecoats in spot repairs. Excellent UV, scratch and chemical resistance. The manufacturer recommends it for spot repair only. Mixing: hardener Chamaleon UHS Hardener 289, 2:1 by volume, no thinner. By weight for 1 l of mix: 653 g clear coat + 333 g hardener (do not zero the scale between components). Spraying viscosity 15-16 s (DIN 4 mm, 20°C). Pot life at 20°C is only 30 minutes - apply within 30 minutes of mixing. Close both cans after use. Application: the repair area must be properly primed, filled, sanded and degreased; remove dust with a tack cloth. Apply over fully cured basecoat. For the 40-minute drying time: gravity gun (1.2 mm nozzle recommended), material flow opened 1.5-2 turns from closed, wide (not round) fan. Apply 2 thin cross coats: first a fast-hand, thin, closed glossy coat (20-25 µm), 5-10 minutes flash-off, then a slow-hand, thin, closed glossy coat (30-35 µm). Total thickness must not exceed 50-60 µm, otherwise drying time increases. Can be polished 60 minutes after application at 20°C. Per the manufacturer's data sheet: pressure 2.0-2.5 bar (gravity or HVLP), nozzle 1.2-1.3 mm. Coverage 7.5-8.5 m²/l. Work at no less than +12°C and no more than 80% relative humidity. Drying at 20°C: dust-free in 10-15 minutes, touch-dry in 35 minutes, ready for assembly in 40 minutes; at 60°C: 10 minutes; short-wave IR: 5 min (object no more than 60-70°C). Chamaleon LASER polishing compounds are recommended. VOC max. 415 g/l. Shelf life 24 months in the tightly closed original container. See the SDS for safety information.

Application

The product is intended for the following surfaces and jobs:

  • Automotive

Not sure whether it suits your job? Call us +995 32 25 600 25 or ask the site assistant in the bottom right corner.

Documents

Similar products