
CHAMALEONCode 00314
Chamaleon 2K Headlight Clear Coat Spray, 200 ml
/ pc · incl. VAT

CHAMALEONCode 00314
Chamaleon 2K Headlight Clear Coat Spray, 200 ml
- Manufacturer
- CHAMALEON
- Code
- 00314
- Category
- Varnishes
- Country of origin
- Germany
Availability: In stock
52.95 ₾
/ pc · incl. VAT
Quantity
Tbilisi next day · free delivery over 100 ₾
Specifications
General
- Manufacturer
- CHAMALEON
- Code
- 00314
- Category
- Varnishes
Origin
- Country of origin
- Germany
Unit and packaging
- Unit
- pc
Description
Chamaleon 2K headlight clear coat spray 200 ml is a special high-gloss, super-transparent two-component acrylic clear coat for professional headlight restoration. Real 2K quality gives the highest durability: it is extremely resistant to chemicals, fuels and de-icing salt, provides excellent UV protection and is scratch- and abrasion-resistant. It seals and protects the plastic surface against weathering and yellowing, so headlights stop going "milky". Quick drying, heat resistant up to 90°C.
Preparation: remove the old protective film with coarse sandpaper, then rework the surface in small steps with ever finer paper (e.g. P400 / P500 / P800 / P1000 / P1500) and degrease the headlight thoroughly.
Activating the hardener: the hardener is in a separate inner cartridge inside the can. Remove the protective plastic cap, take out the metal ring, fit it over the metal pin and pull it out as far as it goes; rotate the ring 360° to open the inner cartridge and release the hardener; then shake the can vigorously for 3 minutes. Once activated, the mix stays usable for 24 hours at 20°C.
Use: mask the parts that should not be coated and wear a respirator (A2/P3 recommended). The can should be at room temperature; shake it and spray a test first. Apply 2-3 coats from 15-20 cm, with 2-3 minutes between coats.
Per the manufacturer's data sheet: drying at 20°C - dust-free in 5 minutes, touch-dry in 4-5 hours, fully dry in 7 hours. Coverage 0.3-0.4 m² per 200 ml can. Work at +12 to +25°C and no more than 80% relative humidity, with good ventilation. Clean the valve after use: turn the can upside down and press the nozzle for about 5 seconds. VOC max. 678 g/l. Shelf life 36 months in the tightly closed original container. See the SDS for safety information.
Application
The product is intended for the following surfaces and jobs:
- Automotive
Not sure whether it suits your job? Call us +995 32 25 600 25 or ask the site assistant in the bottom right corner.
Documents
Similar products




86.20 ₾ - 279.60 ₾
setPOLCHEM PS.11 High-Gloss PU Varnish with Hardener
POLCHEM ·G1147In stockChoose a size