
CHAMALEONCode G1085N037
Chamaleon Guard 2K Truck Bed Liner with Hardener
· clear/ set · incl. VAT
clearCHAMALEONCode G1085N037
Chamaleon Guard 2K Truck Bed Liner with Hardener · clear
- Manufacturer
- CHAMALEON
- Code
- N037
- Category
- Other
- Country of origin
- Germany
Choose a colour
Availability: In stock
90.00 ₾
/ set · incl. VAT
Quantity
Tbilisi next day · free delivery over 100 ₾
What is in one set 2
- 1xChamaleon 250ml Hardener for 2K Truck Bed LineCode 00309
- 1xChamaleon 0.750ml TINTABLE Guard 2K Truck Bed LinerCode 00364
Specifications
General
- Manufacturer
- CHAMALEON
- Code
- N037
- Category
- Other
Origin
- Country of origin
- Germany
Unit and packaging
- Unit
- set
Description
Chamaleon Guard 2K truck bed liner, 750 ml + 250 ml hardener. A highly resistant two-component polyurethane-acrylic coating for pick-up truck beds and heavy-duty surfaces on commercial and off-road vehicles, SUVs, camper vans and trailers. It forms a tough textured coat that resists scratches and impacts, protects against corrosion, stains, rust and mechanical damage, and reduces vibration and noise. Resistant to UV, weather, fuels and oils. Excellent vertical stability allows very high-build coats. Withstands 180°C short-term and 150°C continuously. Used on bodies, rims, caravan floors and storage areas, underbodies and chassis, bull-bars, running boards, roof racks, wheel arches and ramps. Available in black and in a tintable (clear, TINTABLE) version that is coloured with basecoat.
Preparation: the surface must be clean, dry and free of rust and grease; remove old loose coatings. Degrease steel and aluminium, sand with P240-320, blow off, degrease again and apply Chamaleon primers: first 2K Wash primer 404 or 2K Epoxy primer 455, then a filling primer. Pre-treat zinc with an ammonia wetting agent. Sand old paint with P220-280. Sand wood lightly; not suitable for very oily or resinous woods such as teak. Scuff GRP with an abrasive pad.
Mixing and application: hardener Chamaleon 241, mixing ratio 3:1 by volume - add 250 ml hardener to the 750 ml can and shake vigorously. Ready to use; up to 10-20% Chamaleon UNI Thinner 322 can be added for HVLP application. For the tintable version, add 100 ml of undiluted basecoat after the hardener. Pot life at 20°C: 1-1.5 hours. Spray with a UBS (underbody) gun or HVLP (nozzle 1.6-2.5 mm) at 2.0-4.0 bar, in 2-3 coats with 10-60 minutes between coats. For an even texture apply the second coat as a drop coat; distance and pressure change the texture, so spray a test first. Remove masking tape immediately after application, otherwise it will peel off the fresh coat.
Per the manufacturer's data sheet: dry film thickness 100-380 µm, coverage 4.7 m²/l at 100 µm and 3 m²/l at 200 µm. Drying at 20°C - dust-free in 15-20 minutes, touch-dry in 3-4 hours, ready for assembly in 24 hours; at 60°C - 30 minutes / 1-2 hours (10-15 minutes flash-off before the oven). Work at no less than +12°C and no more than 80% relative humidity, with good ventilation. VOC max. 500 g/l. Shelf life 36 months in the tightly closed original container. See the SDS for safety information (separate sheets for each version and the hardener).
Application
The product is intended for the following surfaces and jobs:
- Automotive
Not sure whether it suits your job? Call us +995 32 25 600 25 or ask the site assistant in the bottom right corner.
Documents
- TDSChamaleon 2K Guard Truck Bed Liner (black) - TDS (EN)View document
- SDSChamaleon 2K Guard Truck Bed Liner (black) - SDS (EN)View document
- TDSChamaleon 2K Guard Truck Bed Liner TINTABLE - TDS (EN)View document
- SDSChamaleon 2K Guard Truck Bed Liner TINTABLE - SDS (EN)View document
- SDSChamaleon Hardener 241 for 2K Truck Bed Liner - SDS (EN)View document
- VideoChamaleon Guard 2K Truck Bed Liner - VideoView document


