
CHAMALEONCode 00359
Chamaleon LASER Power Cut Polishing Compound, 1 kg
/ pc · incl. VAT

CHAMALEONCode 00359
Chamaleon LASER Power Cut Polishing Compound, 1 kg
- Manufacturer
- CHAMALEON
- Code
- 00359
- Category
- Polishing
- Country of origin
- Germany
Availability: In stock
48.50 ₾
/ pc · incl. VAT
Quantity
Tbilisi next day · free delivery over 100 ₾
Specifications
General
- Manufacturer
- CHAMALEON
- Code
- 00359
- Category
- Polishing
Origin
- Country of origin
- Germany
Unit and packaging
- Unit
- pc
Description
Chamaleon LASER Power Cut, 1 kg - an aggressive cutting compound for pre-polishing 2K coatings. It quickly removes sanding marks, yellowing, overspray, orange peel, runs, clouding and signs of wear. Removes P600-800 sanding marks and works well on old paint. Contains no aggressive solvents (user- and environment-friendly), paste-like and clean in use. Optimised for lambswool pads; foam pads can also be used.
Fields of application: gelcoat, topcoat, perspex, PE resin, GFRP and CFRP composites, boat paints.
Per the manufacturer's data sheet: cutting power 10, gloss level 6. Rotary polisher at 1200-1800 rpm.
Use: clean the surface thoroughly. Shake the bottle and apply about 15 g of compound to a lambswool or hard polishing pad. Work in a cross pattern with strong, even pressure at a consistently low speed. Once the compound is evenly distributed and worked in, increase the speed. Work over as large an area as possible to avoid heat build-up. Polishing is complete when only a slightly transparent or oily film remains. Remove residues with a microfibre cloth. If needed, especially on dark paints, use a finishing product to remove holograms and polishing marks.
Work at no less than +15°C and no more than 80% relative humidity. VOC max. 87 g/l. Shelf life 24 months unopened at +15 to +25°C, protected from frost and direct sunlight. See the SDS for safety information.
Application
The product is intended for the following surfaces and jobs:
- Automotive
Not sure whether it suits your job? Call us +995 32 25 600 25 or ask the site assistant in the bottom right corner.


