
CHAMALEONCode G110200318
Chamaleon High-Build Filler Primer Spray, 400 ml
· grey/ pc · incl. VAT
greyCHAMALEONCode G110200318
Chamaleon High-Build Filler Primer Spray, 400 ml · grey
- Manufacturer
- CHAMALEON
- Code
- 00318
- Category
- Paints
- Country of origin
- Germany
Choose a colour
Availability: In stock
24.70 ₾
/ pc · incl. VAT
Quantity
Tbilisi next day · free delivery over 100 ₾
Specifications
General
- Manufacturer
- CHAMALEON
- Code
- 00318
- Category
- Paints
Origin
- Country of origin
- Germany
Unit and packaging
- Unit
- pc
Description
Chamaleon Thick Layer Filler (high build primer), spray 400 ml, is a 1K acrylic filler with excellent filling and covering properties that builds a thick layer in a single pass. It is ideal for spot repair, levelling superficial scratches and minor irregularities on sanded surfaces. It flows very smoothly, dries quickly, sands easily wet or dry, and can be overcoated with water- and solvent-based basecoats. Suitable for steel, aluminium, old paint, polyester putty and plastics (PC, PVC, ABS, PA, SAN, PU, UP, EP). Heat resistant up to 90°C. Available in grey and black.
Preparation: the surface must be clean, dry and free of dust and grease; remove old loose coatings. Sand old paint with P400 dry or P600 wet (on two-layer topcoats P500/600 dry, P800/1000 wet); polyester putty with P240-320, steel with P120, aluminium with P220, then blow off and degrease. Heat plastic parts for 60 minutes at 60°C, degrease with an antistatic cleaner, scuff with a super-fine soft pad, degrease again and let dry completely; testing on a similar plastic is recommended.
Use: mask the parts that should not be painted and wear a respirator (A2/P3 recommended). The can should be at room temperature; shake it for 2 minutes and spray a test first. Apply 3 thin coats from about 15 cm, with 5 minutes between coats. The nozzle gives a variable fan.
Per the manufacturer's data sheet: dry film thickness 70-80 µm (3 coats), coverage 1.2 m² per 400 ml can. Drying at 20°C - dust-free in 5 minutes, sandable after 1 hour; at 60°C in 20 minutes; with IR drying in 15-20 minutes (object temperature no more than 60-70°C). Sand dry with P400-500 or wet with P800-1000. Work at +12 to +25°C and no more than 80% relative humidity, with good ventilation. Clean the valve after use: turn the can upside down and press the nozzle for about 5 seconds. VOC max. 685 g/l. Shelf life 120 months in the tightly closed original container. See the SDS for safety information.
Application
The product is intended for the following surfaces and jobs:
- Automotive
Not sure whether it suits your job? Call us +995 32 25 600 25 or ask the site assistant in the bottom right corner.
Documents
Similar products


302.54 ₾
setPOLCHEM PA.70 White PU Primer with PH.20 Hardener
POLCHEM ·G1163Temporarily unavailableChoose a size
