Chamaleon transparent paint for glass and plastic, spray 400 ml, is a high-grade nitro-combi paint for tinting transparent and semi-transparent surfaces: glass, paintable transparent plastics, light bulbs and metal. The coat is transparent, so the texture of the surface stays visible. It keeps its gloss and colour (light-fast, non-yellowing), adheres well, dries quickly, resists scratches, impacts and weather, and withstands temperatures up to 80°C. Available in transparent black and transparent red.
Attention: in some countries tinting vehicle lights and windows is not allowed. Not suitable for polycarbonate and must not be sprayed over synthetic paints. Test before painting light bulbs, as adhesion cannot be guaranteed at every temperature.
Preparation and use: the surface must be clean, dry and free of grease and dust. Mask the parts that should not be painted and wear a respirator (A2/P3 recommended). Prime plastic parts with Chamaleon transparent plastic primer first. The can should be at room temperature; shake it for 3 minutes and spray a test first. Spray from 20-30 cm in several thin coats until you reach the effect you want, with 3-5 minutes between coats; shake the can again before each coat.
Per the manufacturer's data sheet: drying at 20°C - dust-free in 10 minutes, touch-dry in 50 minutes, fully dry in 1 hour. Coverage 1.3 m² per 400 ml can. Work at +12 to +25°C and no more than 60% relative humidity, with good ventilation. Clean the valve after use: turn the can upside down and press the nozzle for about 5 seconds. VOC max. 735 g/l. Shelf life 120 months in the tightly closed original container. See the SDS for safety information.