Reffix

Masking and Protection

Masking and Protection in the catalogue

Masking tape

Masking tape covers the edges that are not being painted and peels off without a trace. Paper masking tape is for everyday work; for cars there is a heat-resistant tape that copes with up to 80 degrees, so it does not melt or leave adhesive in the drying booth. The tape comes in widths from 19 to 50 mm and in rolls of 30-45 metres. Every size is in the tapes subcategory.

Film, foam and seam sealing strip

While painting, everything that is not being painted has to be covered. Packing film on a roll protects glass, tyres and neighbouring panels from overspray and is held with tape. Foam roll goes into door and bonnet gaps so paint does not get inside and no hard edge is left; the seam sealing strip does the same job, a narrow foam strip of 8 or 10 mm that makes a soft, invisible edge in the gap. All of these are in the masking film and protection subcategory.

How to choose the size

Tape width is given in millimetres and length in metres. Narrow tape, 19-25 mm, is for curved edges and small parts; wide tape, 50 mm, for straight edges, large areas and holding film. Remove the tape before the paint dries fully so the edge stays clean. The price on the card is per roll, and the filter sorts by width and brand.

Frequently asked questions

Which tape should I use when painting?
Paper masking tape, which peels off without a trace. For car painting choose a heat-resistant tape that copes with up to 80 degrees in the drying booth. Remove the tape before the paint dries fully so the edge stays clean.
What is a seam sealing strip?
A seam sealing strip is a narrow foam strip, 8 or 10 mm wide, placed in door, bonnet and boot gaps before painting. It keeps paint out of the gap and leaves a soft, invisible transition instead of a hard edge.
How much does masking tape cost?
The price depends on the width and length: narrow 19 mm tape costs the least, wide 50 mm and heat-resistant tape cost more. The price on every card is per roll.
How do I remove tape residue?
Soften the leftover adhesive with a sticker remover or a silicone remover and wipe it with a soft cloth; both are in the solvents category. Do not use a harsh thinner on a clear-coated surface, it dulls the finish.